Old Village Vaulted-Ceiling Lighting Plan
Designed a recessed layout for a 14 ft vaulted living room with sloped-ceiling housings, gimbal trims for art lighting, and zoned dimming.
OutcomeTown of Mount Pleasant inspection cleared in a single visit.

Licensed & Insured Electricians
EmergenServe provides premium recessed lighting installation throughout Mount Pleasant. From custom homes in I'On and Dunes West to established neighborhoods in Old Village and Belle Hall, our licensed electricians deliver expertly designed LED recessed lighting that elevates every room in your home.
How much does recessed lighting installation cost in Mount Pleasant, SC?
In Mount Pleasant, most recessed lighting installs run $125 to $250 per light installed, depending on ceiling type, insulation, and switching. EmergenServe is a licensed South Carolina electrical contractor providing free on-site quotes and same-week install dates across Mount Pleasant and the Lowcountry.
(843) 754-1671, available 24/7
Mount Pleasant homeowners expect the best, and recessed lighting installation is one of the most effective ways to elevate a home's interior. Clean sightlines, no dangling fixtures, and smooth, even illumination from LED can lights make any room feel larger and more refined. Our Mount Pleasant electricians design lighting layouts that complement the architectural style of your home.
From the waterfront properties of Old Village to the spacious custom homes in Park West and Dunes West, Mount Pleasant features a wide range of ceiling types, including coffered, tray, vaulted, and standard flat ceilings. Our electricians have experience installing recessed lighting in all of them, using the right housing type and trim style for each application.
Energy efficiency matters in Mount Pleasant, especially during the long Lowcountry summers. LED recessed lighting generates far less heat than incandescent alternatives, reducing the load on your HVAC system while delivering superior light quality. Every installation includes dimmable drivers and compatible switches for full brightness control.
Mount Pleasant custom homes in I'On, Park West, and Carolina Park often run on Lutron RadioRA 2, Lutron Caseta, Control4, or Savant smart-lighting platforms, and we program the new recessed circuits directly into the existing system instead of leaving you with a standalone dimmer on the wall. We add the new loads to existing scenes (kitchen prep, dining, entertain, away), confirm 1% dim performance on every LED driver, and label the breaker and the keypad so your housekeeper, your guest, and the next homeowner can all operate the lighting without a cheat sheet. That smart-system integration is the difference between a builder-grade lighting install and the kind of Mount Pleasant recessed-lighting work owners reorder for the next renovation.
Recessed lighting installation is one of the most impactful upgrades you can make to your Mount Pleasant home. Unlike traditional flush-mount fixtures or chandeliers, recessed lights sit flush with the ceiling, creating clean sightlines and making rooms feel larger and more open. LED recessed lights deliver even, shadow-free illumination that is perfect for kitchens, living rooms, bathrooms, and hallways.
Every recessed lighting installation we perform in Mount Pleasant uses energy-efficient LED fixtures with IC-rated housings, airtight seals, and dimmable drivers. This means your lighting is safe, efficient, and fully adjustable from bright task lighting to soft ambient glow.
Our Mount Pleasant electricians handle everything from a single can light addition to a full-home recessed lighting plan with multiple dimmer zones. We provide free estimates, upfront pricing, and a workmanship warranty on every installation.
We assess your Mount Pleasant home, measure the room, and design a recessed lighting layout with proper spacing, trim selection, and dimmer zones.
We cut precise ceiling openings, install IC-rated LED housings, run wiring, and connect everything to dedicated dimmer switches.
We test every light, program dimmer settings, and walk you through the controls so you get the exact lighting experience you want.
Every room in your Mount Pleasant home has different lighting needs. Our electricians design recessed lighting layouts tailored to how you actually use each space, ensuring the right amount of light exactly where you need it.
The kitchen is the most popular room for recessed lighting installation in Mount Pleasant homes. We position 6-inch LED can lights over countertops, islands, and sink areas for bright, shadow-free task lighting. Most Mount Pleasant kitchens need 4 to 8 recessed lights depending on size. We wire each zone to a separate dimmer so you can switch from bright cooking light to soft dining ambiance instantly. For kitchens with under-cabinet lighting, we coordinate both systems on a single smart switch panel.
Living rooms in Mount Pleasant homes benefit from recessed lighting that replaces bulky ceiling fans with light kits or dated flush-mount fixtures. We install 6-inch recessed lights around the room perimeter with adjustable gimbal trims to accent artwork, bookshelves, or architectural features. Dimmable LED drivers let you set the mood for movie nights, reading, or entertaining. For living rooms with vaulted or tray ceilings, we use sloped-ceiling housings that direct light downward evenly.
Bedroom recessed lighting installation in Mount Pleasant creates a clean, modern ceiling with no dangling fixtures. We recommend 4-inch recessed lights for bedrooms because they produce softer, more intimate illumination. Placing lights over closet areas, reading nooks, and dressers provides functional task lighting without the harshness of overhead fixtures. Every bedroom installation includes a dimmer switch so you can lower lights for winding down in the evening.
Bathrooms require special attention during recessed lighting installation. NEC 2026 requires wet-rated or damp-rated fixtures in shower and tub areas. Our Mount Pleasant electricians install appropriate fixtures in each bathroom zone: wet-rated LED recessed lights directly over showers, damp-rated fixtures in the general bathroom area, and standard housings in adjacent closets or dressing areas. Proper bathroom recessed lighting eliminates shadows at the vanity and provides even illumination for grooming.
Hallways and entryways are often the darkest areas in Mount Pleasant homes. Recessed lighting installation transforms these transitional spaces with evenly spaced 4-inch LED can lights that provide welcoming illumination from the moment you walk through the door. We typically space hallway recessed lights 4 to 6 feet apart, depending on ceiling height, and connect them to a dimmer or motion sensor for energy savings during overnight hours.
Mount Pleasant's mild climate means covered porches, screened porches, and outdoor living areas get year-round use. We install wet-rated and damp-rated LED recessed lighting in soffits, covered patios, and outdoor ceilings throughout Mount Pleasant. These fixtures are sealed against moisture and rated for temperature extremes. Outdoor recessed lighting extends your living space into the evening and enhances home security by illuminating entry points and walkways.
If your Mount Pleasant home was built before 2010, there is a good chance it has older incandescent or halogen recessed lighting. These fixtures consume significantly more energy, generate excessive heat, and require frequent bulb replacements. Upgrading to LED recessed lighting is one of the smartest electrical investments a Mount Pleasant homeowner can make.
LED recessed lights use 75% less electricity than incandescent equivalents. A typical 12-watt LED recessed light produces the same brightness as a 65-watt incandescent BR30 bulb. For a Mount Pleasant home with 20 recessed lights running 5 hours per day, switching from incandescent to LED can save $150 to $250 per year on electricity alone. LED bulbs also last 25,000 to 50,000 hours compared to 1,000 to 2,000 hours for incandescent, meaning years of maintenance-free lighting.
Heat output is another critical factor, especially during Mount Pleasant's hot summers. Incandescent recessed lights generate significant heat that radiates into the room and into the attic space above, increasing cooling costs. LED recessed lights run cool to the touch, reducing the strain on your HVAC system and lowering the risk of heat-related issues in your ceiling cavity. Our Mount Pleasant electricians retrofit existing incandescent can lights to LED in a single visit, often without replacing the housing.
Every recessed lighting installation EmergenServe performs in Mount Pleasant meets the National Electrical Code (NEC 2026). Code compliance is not optional. It protects your family, preserves your homeowner's insurance coverage, and ensures your home passes inspection if you ever sell or refinance.
NEC 2026 requires all recessed luminaires installed in insulated ceilings to be IC-rated (insulation contact), meaning the fixture housing is designed to be safely covered with insulation without creating a fire hazard. Additionally, fixtures in insulated ceilings must be airtight to prevent conditioned air from escaping into the attic, which wastes energy and can cause moisture problems in Mount Pleasant's humid climate.
In wet locations such as showers and outdoor soffits, NEC 2026 mandates wet-rated fixtures with sealed housings and appropriate GFCI protection on the circuit. Our Mount Pleasant electricians verify the rating of every fixture before installation and ensure all circuits are properly protected with the correct breaker type and wire gauge.
Hiring an unlicensed handyman for recessed lighting installation in Mount Pleasant may save money upfront, but it often results in non-compliant work that fails inspection, voids warranties, and creates safety hazards. EmergenServe's licensed electricians guarantee code-compliant installations on every project, and we coordinate directly with local inspectors when permits are required.
Selecting the right recessed lighting involves more than picking a fixture off the shelf. Size, color temperature, trim style, and housing type all affect the final result. Our Mount Pleasant electricians guide you through every decision.
The two most common recessed light sizes are 4-inch and 6-inch. Four-inch fixtures work best in smaller spaces like hallways, bathrooms, and closets where a more subtle light source is preferred. Six-inch fixtures are the standard for kitchens, living rooms, and bedrooms where broader, more powerful illumination is needed. Our Mount Pleasant electricians help you choose the right size based on ceiling height, room dimensions, and your aesthetic preference.
Color temperature is measured in Kelvin (K) and determines whether your recessed lighting looks warm and cozy or bright and clinical. For most Mount Pleasant homes, we recommend 2700K to 3000K (warm white) for living spaces and bedrooms, and 3500K to 4000K (neutral to cool white) for kitchens, bathrooms, and workspaces. We can install different color temperatures in different rooms to match the function of each space.
Recessed lighting trims are the visible portion of the fixture that sits flush with your ceiling. Baffle trims have ribbed interiors that absorb light and reduce glare, making them ideal for living areas. Smooth reflector trims maximize light output for kitchens and task areas. Adjustable gimbal trims tilt to aim light at artwork or architectural features. Our Mount Pleasant electricians carry trim options in white, brushed nickel, oil-rubbed bronze, and black to match your home's decor.
New construction housings mount to ceiling joists before drywall is installed, providing the most secure and precise installation. Remodel (retrofit) housings are designed for existing ceilings and clip in through a cut opening, making them perfect for upgrading Mount Pleasant homes without major construction. Our electricians determine the right housing type based on your ceiling access and project scope during the initial consultation.
We install recessed lighting throughout Mount Pleasant and surrounding communities. Here are some of the areas we serve.
Recessed lighting installation for Mount Pleasant's most distinctive neighborhoods. We install LED can lights that complement traditional and Lowcountry architecture while delivering modern performance.
Popular Mount Pleasant communities get expert recessed lighting layouts for kitchens, great rooms, and outdoor living spaces. We design for proper spacing and dimmer zoning.
Custom home recessed lighting installation in Dunes West and Rivertowne. We work with builders and homeowners on new construction and renovation projects.
Commercial and residential recessed lighting installation near Shem Creek. We upgrade restaurants, shops, and waterfront homes with high-quality LED recessed fixtures.
Based in the Charleston metro area, our electricians provide recessed lighting installation throughout the Lowcountry.
A snapshot of recent permitted recessed lighting installation projects we've delivered for Mount Pleasant homeowners and businesses.
Designed a recessed layout for a 14 ft vaulted living room with sloped-ceiling housings, gimbal trims for art lighting, and zoned dimming.
OutcomeTown of Mount Pleasant inspection cleared in a single visit.
Installed 62 LED recessed fixtures throughout a 3,800 sq ft new construction with Lutron Caseta dimmers in every zone.
OutcomeFirst-time pass on every Town of Mount Pleasant inspection.
Swapped 20 incandescent BR30 cans for 12W LED retrofits with airtight IC-rated trims; added under-cabinet tie-in.
OutcomeCustomer reported $180/yr lighting savings on first Dominion bill cycle.
Electrical work in Mount Pleasant is permitted through the Town of Mount Pleasant Permit Center. As the licensed contractor of record, EmergenServe files the permit, schedules the inspection, and meets the inspector on-site so the work is documented and code-compliant.
Located at 100 Ann Edwards Lane. Residential permits typically issue within one business day; same-day or next-morning inspection slots are routine.
Our most recent verified Google reviews from across the greater Charleston area. Ask about local Mount Pleasant references at your estimate.
Great service! LaShaun was able to come out on a Sunday and fix our electrical emergency. Excellent service and a great guy! We would highly recommend!
Clayton lord
a month ago
Service was great and fast especially with an emergency service call. The technician was great and very knowledgeable. They were able to teach me a little bit on how to address and prevent maybe even fix future problems.
Mason Williams
2 months ago
Amazing! After much calling around, finally found someone to come out on a Sunday morning. My air conditioning and refrigerator had been fried by an electrical problem. Repair for both had been unable to determine to the source. Electrician found the difficulty was caused by the power company. He called them and then waited around while the loose connections were fixed in the power company's equipment. I feel blessed to have found EmergenServe!
Patricia Heller
a month ago
Real work from real jobs across Mount Pleasant and the Charleston Lowcountry, from panel upgrades to storm night emergencies.






Call now for a free estimate on recessed lighting installation for your Mount Pleasant home or business. Same-day scheduling available.
Recessed lighting installation in Mount Pleasant typically costs $150 to $300 per light. A kitchen with 6 LED recessed lights runs $900 to $1,800 including wiring, trims, and dimmer. Call (843) 754-1671 for a free estimate.
Yes. Our Mount Pleasant electricians install recessed lighting in coffered, tray, and vaulted ceilings. We position lights within the coffered panels for a clean, architectural look that highlights the ceiling detail.
For Mount Pleasant homes, we recommend baffle trims for living areas (they reduce glare), smooth trims for kitchens and bathrooms, and adjustable gimbal trims for accent lighting on artwork or architectural features.
Yes. We install wet-rated LED recessed lighting in outdoor soffits, covered porches, and screened porches throughout Mount Pleasant. These fixtures are rated for exposure to moisture and coastal salt air.
EmergenServe provides recessed lighting installation in cities throughout the greater Charleston area.
Fill out the form below and our team will get back to you promptly to answer any questions. If you would like to schedule now, you can take a look at our online calendar and BOOK YOUR APPOINTMENT ONLINE.
Emergency Services Available 24/7
Recessed lighting transforms a Mount Pleasant home like nothing else. The right number of cans, in the right pattern, on the right dimmable LED drivers, makes ceilings feel taller, kitchens feel larger, and living spaces feel finished. The wrong recessed install, too few cans, the wrong color temperature, mismatched trims, or non-dimmable drivers buzzing on a wall dimmer, is one of the most common complaints we hear from Mount Pleasant homeowners who hired the cheapest bid.
Mount Pleasant homes vary widely in ceiling construction, insulation type, and attic access, all of which affect how recessed lights are installed. New construction can typically use new-construction housings nailed directly to joists. Existing finished ceilings require remodel-rated cans installed through a hole saw cut, with springs that grip the back of the drywall. Insulated ceilings require IC-rated airtight housings to comply with energy code and prevent attic moisture issues common in the humid Lowcountry climate.
We size every recessed lighting plan to the room: kitchen work zones get tighter spacing for task light, living rooms get wider spacing for ambient wash, hallways get a single line of evenly spaced cans, and primary bedrooms often blend recessed cans with a center fixture for a layered look. Every fixture is matched in color temperature (typically 2700K to 3000K for residential warmth) and CRI (90+ for accurate color rendering on artwork and skin tones).
Modern LED recessed lights have moved past the buzzing, color-shifting fixtures of a decade ago, but only when the right components are paired together. We specify dimmable LED drivers from reputable manufacturers (Halo, Lutron, Lithonia, DMF) and we pair them with compatible Lutron Caséta or Diva dimmers so dimming is silent and smooth from 100% down to 1%.
Color temperature is a critical and often overlooked decision. We use 2700K in primary living spaces and bedrooms for a warm, incandescent-like feel, 3000K in kitchens for a slightly crisper task light, and 3500K to 4000K in garages and workshops where neutral-white visibility matters. Mixing color temperatures across an open floor plan looks amateur, so we plan the entire home together.
We start with a free in-home consultation: walk the rooms, listen to your goals, and sketch a layout that balances symmetry, function, and budget. We provide a written quote with fixture model numbers, can count per room, dimmer plan, and any electrical work needed (most projects can run off existing circuits, but heavily-loaded kitchens occasionally need a dedicated circuit added).
On install day, our electricians lay drop cloths over floors and furniture, mark every can location with chalk and a stud finder, then carefully cut each hole with a hole saw to minimize drywall damage. We fish wire through the attic when accessible, use fish tape and remodel boxes when not, and patch any unavoidable access holes with quick-set drywall mud. Most Mount Pleasant projects are completed in a single day with minimal disruption.
Most living rooms in Mount Pleasant homes look best with 6-10 cans on a 4-6 foot grid, depending on ceiling height and room size. We design the layout based on your specific room dimensions during the free consultation.
Cuts are precise and small (typically 4 or 6 inches). Any unavoidable access holes are patched with quick-set mud and primed; most homeowners cannot tell where the access was made after touch-up paint. We work hard to minimize patching in Mount Pleasant homes.
Absolutely. LED recessed lights use 80-90% less energy, last 25,000-50,000 hours instead of 2,000, generate almost no heat (better for insulation and AC bills), and modern LEDs render color as well as halogen ever did.
recessed lighting installation Mount Pleasant · LED can lights Mount Pleasant SC · kitchen recessed lighting Mount Pleasant · dimmable LED installation Mount Pleasant · recessed lighting electrician Mount Pleasant · Lutron dimmer installation Mount Pleasant · IC airtight recessed cans Mount Pleasant · Mount Pleasant lighting design · Lowcountry recessed lighting · Charleston County recessed lighting installer
Mount Pleasant is not one town electrically, it is four. The Old Village east of Coleman still has homes on 60-amp fuse panels that predate the Ravenel Bridge. Park West and Belle Hall are 1990s and early 2000s tract builds with aluminum branch wiring quietly failing in the walls. Dunes West, Rivertowne, and Carolina Park run 400-amp services feeding pool equipment, wine rooms, and detached ADUs. And along Coleman and Highway 17 the commercial corridor turns over tenants every 18 months. We service all four, and the truck loads out differently for each.
The homes between Pitt Street, McCants, and Simmons were built between 1900 and 1955. Almost every one we open has some combination of cloth-jacket wiring, ungrounded two-prong outlets, a Federal Pacific Stab-Lok panel that should have been condemned twenty years ago, and a service drop tapped to a live oak that Duke Energy's tree crew will not touch. We stage rewires in these homes room by room so the family can keep power on the refrigerator and the window units while the crew fishes new NM through the plaster.
Roughly 1998 through 2008. Aluminum branch wiring on the 15- and 20-amp receptacle circuits is common in the earliest of these builds, and CO/ALR receptacles are usually mis-terminated. Kitchen small-appliance circuits were routinely under-sized for today's Ninja blenders, induction cooktops, and Instant Pots. Panel real estate is tight; a Level 2 EV charger install here almost always requires a subpanel or a load-management module rather than a spare double-pole slot.
Custom builds from 2010 forward, mostly 320- and 400-amp services with 200-amp house panels and a 200-amp panel dedicated to pool, dock, or shop loads. We see a lot of low-voltage lighting failures at these properties: landscape transformers that were installed with undersized primary conductors and cook themselves after two Lowcountry summers. Generator sizing is the other constant conversation, since these homes have well pumps, saltwater pool heaters, dual HVAC systems, and starlink dishes that all need to ride through a Wando River outage.
Tight lot lines and detached garages with second-story guest quarters. Panel space is always the constraint, and the HOA covenants restrict where a Generac pad or a Tesla wall connector can live. We have a running relationship with the I'On architectural review board and know which enclosure colors and screening approaches get approved on the first submittal.
Every East Cooper home east of Long Point Road sits close enough to the marsh that the copper lugs inside the meter base start to green within seven to ten years. We replace far more meter bases in Mount Pleasant than in any other town we serve. If the meter reader ever leaves a note about a cracked or clouded meter socket cover, that is Dominion's polite way of telling you the lugs are already pitting.
These two brands are the single most common panel we replace in Mount Pleasant. They are known to fail to trip during a fault, which is how house fires start. Insurance underwriters increasingly refuse to renew policies on homes that still have them. A same-day replacement with a Square D QO or Siemens PN series panel resolves the underwriting problem and the safety problem at once.
Exterior receptacles, pool equipment, and dock power in Mount Pleasant get soaked constantly during the summer storm cycle. Older self-test GFCIs eventually stop resetting. We swap them for weather-resistant tamper-resistant units in in-use bubble covers rated for the coastal environment.
A 48-amp Tesla wall connector plus a heat pump plus an electric range plus a dryer will fail a NEC load calc on a 200-amp panel with the standard demand factors. We install a Wallbox Pulsar Plus or a DCC-9 load-management device so the charger backs off automatically when the range or HVAC is cycling, which lets you keep the 200-amp service.
Four-day sectioned rewire. Removed 78 knob-and-tube runs, upgraded from a 60-amp fuse panel to a 200-amp Square D QO, added AFCI/GFCI protection throughout, and coordinated the Dominion disconnect and Town of Mount Pleasant inspection. Homeowner kept the refrigerator and two window units live the entire time on a temporary sub-feed.
24 kW Generac Guardian on a poured pad, natural gas from a new dedicated Dominion Energy meter tap, 200-amp service-entrance rated automatic transfer switch. Load-shed module on the two HVAC compressors so the whole home rides through a hurricane outage with the well pump and cook top online.
Detached garage 130 feet from the main service. Trenched a 6/3 UF-B feeder, set a 60-amp subpanel in the garage, terminated a 48-amp Tesla wall connector on hardwire. Permit pulled with Town of Mount Pleasant, inspected same week.
Existing gas-fired kitchen hood was tripping on start-up because the shunt-trip coordination with the ANSUL system was wired incorrectly by the original contractor. We re-terminated the interlock, verified with the Mount Pleasant fire marshal, and the restaurant passed re-inspection the same afternoon.
"Our 1930s home off Venning had a fuse panel and outlets that sparked when you unplugged a lamp. EmergenServe rewired the whole downstairs in three days without cutting a single hole we could still see when they left. Our insurance renewal went through the same week."
"Bought the house knowing we needed an EV charger and a generator. They walked the load calc with me, showed me why we did not need a service upgrade if we added a load manager, and saved us about $2,800 on the panel work."
"Landscape lighting had failed twice in five years from two other contractors. EmergenServe traced it to an undersized primary run, re-pulled it in conduit, and it has been running two summers without an issue."
Our Mount Pleasant service window is 24/7. From our North Charleston yard we're on the Ravenel Bridge in twenty minutes without traffic, or across the Don Holt via I-526 into Long Point in about the same. During the 4:30 to 6:30 pm push on Coleman we route through Hungryneck to Rifle Range instead. For true emergencies (arcing, burning smell, no power in a hurricane), we roll immediately regardless of traffic and use the emergency shoulder on 526 with Dominion coordination when a downed drop is involved.
Standard residential service change permits are typically issued same-day or next business day through the Town of Mount Pleasant Building Inspections office on Ann Edwards Lane, provided the contractor is registered and current on the annual fee. As a licensed and registered SC contractor with the Town, our applications almost always come back in that window.
Old Village properties fall under Mount Pleasant's Historic District review, and any exterior generator or new meter base is subject to that review. We handle the screening plan, enclosure color spec, and setback drawings and submit them for you. Most single-family generator applications get first-round approval when the equipment is screened behind a low fence or masonry surround.
Almost all of Mount Pleasant is served by Dominion Energy. A very small overlap area near the Berkeley County line north of Cainhoy is Berkeley Electric Cooperative. We coordinate disconnect and reconnect with either utility on your behalf.
Yes. Low-voltage landscape lighting under 30 volts on the secondary side does not require a permit in Mount Pleasant, but the primary supply, transformer, and any 120-volt receptacle serving that transformer does. We pull the required permit and inspection for the primary side and warranty the entire installation end to end.
For an Old Village home in the 1,800 to 2,400 square foot range, a full rewire with panel upgrade typically lands between $22,000 and $34,000 depending on plaster condition, attic access, and how many rooms require AFCI/GFCI retrofit. We provide a written line-item estimate before any work begins.
Explore the other services our Charleston electricians deliver across the Lowcountry.
24/7 emergency electrician in Charleston SC for power outages, sparks, and burning smells, on-site same day.
Residential electrician services covering whole-home wiring, repairs, and safety upgrades for Charleston homes.
Whole-house standby generator installation with Generac and Kohler systems, permitted for Lowcountry hurricane season.
Electrical panel upgrades to 200 amp service and safe replacement of Federal Pacific and Zinsco panels to code.
Level 2 EV charger installation for Tesla, Ford, Rivian, and every major electric vehicle in Charleston SC.
Ceiling fan installation and replacement with fan-rated box reinforcement for indoor rooms and Charleston porches.
Lighting installation and design for recessed, pendant, landscape, and exterior fixtures across kitchens, baths, and yards.
Contact a licensed Charleston electrical contractor for a free estimate and same-day scheduling across the Lowcountry.
SC Commercial Contractor License #M118613. Active general liability and workers' comp coverage. COI sent to your GC, HOA, or closing attorney the same day you ask.
Google Screened and BBB Accredited with 47+ verified five-star reviews from Charleston, Mount Pleasant, Summerville, and across the Lowcountry.
Every job is priced before we lift a tool. No clock running, no surprise add-ons, no guessing what the bill will look like when we're done.
If something isn't right, we come back and fix it. Workmanship stands behind every breaker, outlet, fixture, and panel we install.
Licensed Charleston electrical contractor. 24/7 emergency service across the Lowcountry.